TY - JOUR
T1 - A Reconfigurable Multi-Transmitter IPT System with Pareto-Based Current Allocation for Position-Tolerant UAV Charging
AU - Li, Da
AU - Sun, Pan
AU - Lu, Jianghua
AU - Bie, Weiwei
AU - He, Chao
AU - Huang, Can
AU - Deng, Qijun
PY - 2026/1
Y1 - 2026/1
N2 - Multi-transmitter inductive power transfer improves landing-position tolerance for unmanned aerial vehicle charging yet coordinating the transmitter currents to balance dc-to-dc efficiency, target-region field uniformity, and off-target magnetic leakage remains an open problem. This article casts that coordination as a constrained three-objective current-allocation problem. A 3×3 array of overlapping coils is driven by four reusable inverter channels through a shared routing matrix, supporting one-, two-, and four-transmitter modes while reducing the high-frequency switch count from 36 to 16. For each receiver position, Pareto-optimal current vectors are generated offline and stored in a position-indexed lookup table; a two-stage rule—near-knee efficiency screening followed by normalized-utility ranking—selects a single hardware-feasible operating point. On a 350 W, 85 kHz prototype with a 50 mm air gap, peak measured dc-to-dc efficiencies reach 88.6% (2-Tx) and 87.9% (4-Tx). Measured lateral sweeps exceeding 100 mm compare the proposed and balanced-current allocations, while model-based analyses provide comparisons with the mutual-inductance-proportional and efficiency-only baselines. The same operating-point group is retained for 99.4% of sampled weight combinations, indicating low sensitivity to preference selection. A reference-anchored spatial assessment predicts that the 350 W target remains reachable across most of the charging area under a 6 A branch-current limit, enabling position-adaptive operation with explicit control over efficiency and field distribution. © 2013 IEEE.
AB - Multi-transmitter inductive power transfer improves landing-position tolerance for unmanned aerial vehicle charging yet coordinating the transmitter currents to balance dc-to-dc efficiency, target-region field uniformity, and off-target magnetic leakage remains an open problem. This article casts that coordination as a constrained three-objective current-allocation problem. A 3×3 array of overlapping coils is driven by four reusable inverter channels through a shared routing matrix, supporting one-, two-, and four-transmitter modes while reducing the high-frequency switch count from 36 to 16. For each receiver position, Pareto-optimal current vectors are generated offline and stored in a position-indexed lookup table; a two-stage rule—near-knee efficiency screening followed by normalized-utility ranking—selects a single hardware-feasible operating point. On a 350 W, 85 kHz prototype with a 50 mm air gap, peak measured dc-to-dc efficiencies reach 88.6% (2-Tx) and 87.9% (4-Tx). Measured lateral sweeps exceeding 100 mm compare the proposed and balanced-current allocations, while model-based analyses provide comparisons with the mutual-inductance-proportional and efficiency-only baselines. The same operating-point group is retained for 99.4% of sampled weight combinations, indicating low sensitivity to preference selection. A reference-anchored spatial assessment predicts that the 350 W target remains reachable across most of the charging area under a 6 A branch-current limit, enabling position-adaptive operation with explicit control over efficiency and field distribution. © 2013 IEEE.
KW - Antennas
KW - Charging (batteries)
KW - Charging (furnace)
KW - Computer software reusability
KW - Efficiency
KW - Electric charge
KW - Electric inverters
KW - Energy transfer
KW - Inductive power transmission
KW - Magnetic leakage
KW - Magnetic levitation vehicles
KW - Pareto principle
KW - Table lookup
KW - Transmitters
KW - Unmanned aerial vehicles (UAV)
KW - 'current
KW - Aerial vehicle
KW - Current allocation
KW - Inductive powertransfer (IPT)
KW - Magnetic-field
KW - Magnetic-field shaping
KW - Multi-transmitter system
KW - Operating points
KW - Unmanned aerial vehicle charging
KW - Vehicle charging
KW - Inductance
KW - current allocation
KW - Inductive power transfer
KW - magnetic-field shaping
KW - multi-transmitter systems
KW - unmanned aerial vehicle charging
UR - https://openir.whu.edu.cn/AchievementDetail/EI_6f0754fd-833c-42dc-9cc1-b5409e642b55
U2 - 10.1109/jestpe.2026.3724184
DO - 10.1109/jestpe.2026.3724184
M3 - Article
SN - 2168-6777
JO - IEEE Journal of Emerging and Selected Topics in Power Electronics
JF - IEEE Journal of Emerging and Selected Topics in Power Electronics
ER -