Skip to main navigation Skip to search Skip to main content

ADHESIVE FORCE OF MARINE CLAY.

  • Guo-Dong Feng*
  • , Lui Zude
  • *Corresponding author for this work
  • Wuhan Inst of Hydraulic &

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

It was found by a model test and then by in-situ test of a miniature offshore oil-drilling craft that adhesive force of marine clay to the embedded sides and bottom of the mat of a craft is composed of three components: the adhesive and the suction on the bottom, and the friction on all sides. Among them suction is the major factor and dominates the other two. The ultimate strength of adhesive force depends on the boundary conditions of the mat and on the way the craft is lifted. The distribution of adhesion and suction varies with the rigidity of the mat. In order to facilitate the floating of the craft, it is necessary to find ways to eliminate the adhesive force; low-pressure filling and high-pressure jetting of water are the two methods suggested, and their validity is verified by model tests in the laboratory and by in-situ experiments of miniature craft.
Original languageEnglish
Title of host publicationASTM Special Technical Publication
PublisherASTM International
Pages267-280
Number of pages14
ISBN (Electronic)0803104901
ISBN (Print)0803104030, 0803104081, 0803104383, 0803104901, 0803161670, 9780803102996, 9780803103665, 9780803109926, 9780803114692, 9780803166431, 9780803175402
StatePublished - Jan 1986

Publication series

NameASTM Spec Tech Publ
ISSN (Print)0066-0558

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 14 - Life Below Water
    SDG 14 Life Below Water

Indexed by

  • EI
  • Scopus

Fingerprint

Dive into the research topics of 'ADHESIVE FORCE OF MARINE CLAY.'. Together they form a unique fingerprint.

Cite this