Skip to main navigation Skip to search Skip to main content

Controllable fabrication of ZnO transverse ultrasonic wave transducer by adjusting bias voltages and short annealing

  • Zechang Xiong
  • , Yanghui Jiang
  • , Xiaomei Zeng
  • , Vasiliy O. Pelenovich
  • , Zheng Wang
  • , Xuejiao Ma
  • , Yue Ding
  • , Chang Xu
  • , Jie Liu
  • , Bing Yang*
  • , Jun Zhang*
  • *Corresponding author for this work
  • Beijing Smart-Chip Microelectronics Technology Co. Ltd

Research output: Contribution to journal › Article › peer-review

Abstract

The acquisition of transverse ultrasonic waves from ZnO coatings for bolt preload measurement presents significant challenges. In this study, radio-frequency (RF) magnetron sputtering was employed to deposit ZnO piezoelectric films using a pure zinc (Zn) metal target. The structural and functional properties of the ZnO ultrasonic transducer were systematically investigated as a function of post-annealing temperatures and bias voltage during deposition. Experimental results demonstrate that the bias voltage plays a critical role in determining the coating's microstructure and ultrasonic performance. At bias voltages exceeding -100 V, the elevated kinetic energy of sputtered particles induces a densely packed lamellar structure, distinct from the columnar crystal morphology observed at lower bias voltages (below -100 V). Notably, under higher bias conditions, a unique "scale-like" surface morphology was observed, which effectively facilitated the excitation of pure transverse ultrasonic wave modes. Furthermore, the effects of annealing treatments on coating morphology, crystallinity, and ultrasonic responsiveness were evaluated. A 1-h annealing process at 200 degrees C significantly enhanced the ultrasonic signal intensity. However, prolonged annealing at temperatures above 300 degrees C progressively compromised the structural integrity of the coatings, leading to a reduction in ultrasonic response. These findings provide valuable insights into optimizing ZnO-based transducers for reliable preload monitoring in bolted connections.
Original languageEnglish
Pages (from-to)28351-28361
Number of pages11
JournalCeramics International
Volume51
Issue number19
Early online dateJul 2025
DOIs
StatePublished - Aug 2025

Funding

This work was supported by the National Key R & D Program of China (Grant No. 2023YFC3010300) .

Keywords

  • Ultrasonic transverse wave
  • Magnetron sputtering
  • ZnO coating
  • Piezoelectric coating

Indexed by

  • EI
  • Scopus
  • SCIE

Fingerprint

Dive into the research topics of 'Controllable fabrication of ZnO transverse ultrasonic wave transducer by adjusting bias voltages and short annealing'. Together they form a unique fingerprint.

Cite this