Abstract
Amongst thermoelectrics, Bi2Te3 is special owing to its peak performance near room temperature, which enables it to be used for both energy harvesting and cooling. Despite extensive studies on this compound, Bi2Te3-based bulk materials are usually prepared by field-assisted sintering and hot pressing. This necessitates sophisticated equipment and tedious compositional control, both of which are undesirable for large scale applications. In this work, a low-temperature liquid phase sintering (LPS) method was employed to prepare p-type Bi0.5Sb1.5Te3/SiC composites with enhanced thermoelectric properties. In addition, a nearly two-fold increase in the power factor was observed post heat treatment at 350 degrees C. This can be ascribed to carrier concentration modulation due to porosity induced by heat treatment. Further addition of 0.6 vol% SiC results in a low lattice thermal conductivity of 0.33 W m(-1) K-1, which can be ascribed to phonon scattering due to various defects induced by the SiC inclusion. Ultimately, a figure of merit ZT of 1.05 at 340 K was achieved for Bi0.5Sb1.5Te3/0.6 vol% SiC, 20% higher than that of the pristine sample. Moreover, an average ZT of 0.87 at 300-500 K was attained, comparable to state-of-the-art values via high-temperature processing. This work showcases the promising application of the low-temperature LPS technique for energy-efficient processing of thermoelectrics.
| Original language | English |
|---|---|
| Pages (from-to) | 8912-8921 |
| Number of pages | 10 |
| Journal | Journal of Materials Chemistry A |
| Volume | 11 |
| Issue number | 16 |
| Early online date | Mar 2023 |
| DOIs | |
| State | Published - 25 Apr 2023 |
Funding
Y. Z. would like to acknowledge financial support from the National Natural Science Foundation of China (Grant No. 52102257) and Knowledge Innovation Program of the Wuhan-Shuguang Project (Grant No. 2022010801020375). A.S. acknowledges funding from A*STAR (Agency of Science, Technology and Research) Career Development Fund (CDF) no. C210112022.
UN SDGs
This output contributes to the following UN Sustainable Development Goals (SDGs)
-
SDG 7 Affordable and Clean Energy
Keywords
- Antimony compounds
- Bismuth compounds
- Energy efficiency
- Energy harvesting
- Hot pressing
- Liquid phase sintering
- Silicon
- Silicon carbide
- Spark plasma sintering
- Temperature
- Thermal conductivity
- Thermoelectricity
- Bulk materials
- Compositional control
- Field-assisted sintering
- Large-scale applications
- Liquid- phase sintering
- Lows-temperatures
- Near room temperature
- Peak performance
- Thermoelectric
- Thermoelectric performance
- Carrier concentration
Indexed by
- Scopus
- EI
- SCIE
Fingerprint
Dive into the research topics of 'Enhanced thermoelectric performance in Bi0.5Sb1.5Te3/SiC composites prepared by low-temperature liquid phase sintering'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver