Skip to main navigation Skip to search Skip to main content

Improved preparation of MoS2/graphene composites and their inks for supercapacitors applications

  • Hongxia Wang
  • , Diana Tran
  • , Mahmoud Moussa
  • , Nathan Stanley
  • , Tran T. Tung
  • , Le Yu
  • , Pei Lay Yap
  • , Fuyuan Ding
  • , Jun Qian
  • , Dusan Losic*
  • *Corresponding author for this work
  • Southwest University - China
  • University of Adelaide
  • Jiangsu University

Research output: Contribution to journal › Article › peer-review

56 Scopus citations

Abstract

This paper presents a new and facile method to prepare molybdenum disulfide (MoS2)/graphene composites and their inks based on an improved ball milling process. The developed method is cost effective, environmentally friendly, and scalable, producing few-layer MoS2 material and MoS2/graphene-based inks. The prepared inks after characterization by SEM, Raman, XRD, FTIR, CA and rheology were used to fabricate electrodes for supercapacitors by adopting two designs: 2D printed and sandwiched electrodes. The electrodes showed excellent electrochemical performance with a specific capacitance of 392 Fg(-1) at 5 mV s(-1) and low equivalent resistance of 0.41 Omega, which outperforms the properties of graphene electrodes. The specific capacitance of electrodes prepared by 2D printing using MoS2/graphene ink was 76 Fg(-1) at 5 mV s(-1) with an areal capacitance of 58.5 mF/cm(-2) at 0.77 mg/cm(-2), demonstrating high energy storage capability. The performance of the MoS2/graphene composites and their inks highlights their promising application as electrode materials for high-performance energy storage devices.Y
Original languageEnglish
Article number114700
Number of pages10
JournalMaterials Science and Engineering: B
Volume262
DOIs
StatePublished - Dec 2020

Funding

The authors acknowledge the support from Australian research Council under Linkage Scheme with the grant ARC Research Hub for Graphene Enabled Industry Transformation, IH 150100003 funding under Industrial Transformation Research. This work was also supported by National Natural Science Foundation of China (51603153) and Fundamental Research Funds for the Central Universities of China (SWU119069). Hongxia Wang would like to thank State Scholarship Fund of China (201706270142) for supporting her stay at the University of Adelaide.

Keywords

  • Four-layer MoS2
  • Graphene
  • MoS2/graphene composites
  • MoS2/graphene inks
  • Supercapacitors
  • Spray-2D printing

Indexed by

  • EI
  • Scopus
  • SCIE

Fingerprint

Dive into the research topics of 'Improved preparation of MoS2/graphene composites and their inks for supercapacitors applications'. Together they form a unique fingerprint.

Cite this