Skip to main navigation Skip to search Skip to main content

Microstructure and creep rupture strength of 2 kinds of P91 steels with abnormally low hardness

  • Xiaoxiang Sun
  • , Xue Wang*
  • , Kai Zhang
  • , Da Zhang
  • *Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

7 Scopus citations

Abstract

P91 samples were prepared by means of 2 kinds of heat treatments which involved low normalizing cooling rate &tempering temperature exceeding Ac1 followed by low cooling rate respectively. The correlation between low hardness, microstructure and creep rupture strength was discussed. Results showed that there was a clear microstructure disparity between samples enduring different heat treatments, even though low hardness emerged in both samples. The sample undergoing low normalizing cooling rate featured ferrite structure with coarse grains and continuously distributed precipitates at grain boundaries after normalizing, and intermittently distributed precipitates at grain boundaries after tempering. The sample witnessing tempering temperature exceeding Ac1 followed by low cooling rate represented precipitates inside grains and the morphology of lath martensite in the majority of areas, whereas other areas were characterized by fine blocks of ferrite. The creep rupture strength of the sample experiencing low normalizing cooling rate was higher than the one experiencing tempering temperature exceeding Ac1 followed by low cooling rate, although hardness of the former was lower than that of the latter. For P91 steel, hardness and creep rupture strength did not show a positive correlation, because the grain size and distribution of precipitate also mattered.
Original languageEnglish
Article number105111
Number of pages7
JournalInternational Journal of Pressure Vessels and Piping
Volume207
Early online dateDec 2023
DOIs
StatePublished - Feb 2024

Funding

<b>Acknowledgements</b> The authors would like to express their gratitude for projects sup-ported by the National Natural Science Foundation of China (52174370) , Key Research and Development Project of Hubei Province (2021BAA058) .

Keywords

  • P91 steel
  • Microstructure
  • Hardness
  • Creep rupture strength

Indexed by

  • Scopus
  • SCIE

Fingerprint

Dive into the research topics of 'Microstructure and creep rupture strength of 2 kinds of P91 steels with abnormally low hardness'. Together they form a unique fingerprint.

Cite this