Skip to main navigation Skip to search Skip to main content

Phase transformation of blended Ti and Al powders during spark plasma sintering

  • Zhang Fan
  • , Peng Zhi-Fang
  • , Chen Fang-Yu
  • Research and Development Center

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

Blended Ti and Al powders were sintered by spark plasma sintering(SPS)with 100 °C/min at 400-980 °C. Phase identification and microstructural evaluation of sintered samples were carried out by XRD and EPMA. The results show that the phase transformation process during sintering of blended Ti and Al powders meets the general principle of reaction between Ti and Al powders. That is, reaction is dominated by the diffusion of Al into Ti. The sintering process is divided into four stages: particles softening, Al3Ti formation, intermediate phases formations and final product formation with densification. Al3Ti is formed below the melting point of Al and when Al is used up. Al in Al3Ti diffuses into Ti particles, with the amount of Al 3Ti decreasing and phases Ti2Al5, Al 2Ti, TiAl and Ti3Al forming along the interface. The reaction in stage of Al3Ti formation is accelerated because of the appearance of melted Al. Otherwise, the dense bulk with 98% theoretical density is gained by way of properly pressing to restrain the anti-densification effect of Al.
Original languageEnglish
Pages (from-to)38-41
Number of pages4
JournalJinshu Rechuli/Heat Treatment of Metals
Volume34
Issue number6
StatePublished - Jan 2009

Indexed by

  • Scopus

Fingerprint

Dive into the research topics of 'Phase transformation of blended Ti and Al powders during spark plasma sintering'. Together they form a unique fingerprint.

Cite this