Abstract
Low temperature bonding technology has been a research hotspot in recent years due to its success of avoiding impurities interdiffusion, minimizing thermal stresses between heterogeneous materials, minimizing voids and other defects, and reducing the cost. In this work, a novel low temperature thermocompression bonding technology using nanoporous Cu (NPC) was proposed and the influences of different bonding temperatures, pressures and durations upon the bonding qualities were studied. The possible mechanisms of nano-thermocompression bonding were discussed and analyzed. Bonding under the pressure of 0.5MPa for 120min at 250 degrees C resulted in excellent bonding qualities without any interface and voids in the bonded sample examined by means of scanning electron microscopy (SEM) and scanning acoustic microscope (SAM), which shows much potential of this approach in microelectronics manufacturing, 3D packaging and integration of multi-function devices and provides another new way of fabricating direct bonding copper (DBC) ceramic substrate.
| Original language | English |
|---|---|
| Pages | 19-23 |
| Number of pages | 5 |
| State | Published - 12 Aug 2014 |
| Event | 15th International Conference on Electronic Packaging Technology (ICEPT) - Chengdu,PEOPLES R CHINA, Chengdu, China Duration: 12 Aug 2014 → 15 Aug 2014 |
Conference
| Conference | 15th International Conference on Electronic Packaging Technology (ICEPT) |
|---|---|
| Country/Territory | China |
| City | Chengdu |
| Period | 12/08/14 → 15/08/14 |
Keywords
- 3D packaging
- low temperature bonding
- nano-thermocompression bonding
- nanoporous copper
- process optimization
Indexed by
- CPCI-S
- EI
- Scopus
Fingerprint
Dive into the research topics of 'Research on nano-thermocompression bonding process using nanoporous copper as bonding layer'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver