跳到主要导航 跳到搜索 跳到主要内容

Preparation of high-performance zirconia toughened alumina doped with Cr2O3 and SrO for artificial joints by spray granulation

  • Xu Yan
  • , Bowen Zhang
  • , Yu Wang
  • , Huan Hong
  • , Haiwen Li
  • , Bo Cheng
  • , Jing Yang
  • , Binbin Li*
  • , Xinyu Wang*
  • *此作品的通讯作者
  • Wuhan Univ Technol

科研成果: 期刊稿件 › 论文 › 同行评审

11 引用 (Scopus)

摘要

Zirconia-toughened alumina (ZTA) ceramics have attracted much attention in the medical field as joint replacement materials due to their good mechanical properties and biocompatibility. However, the flexural strength of conventional ZTA is still slightly insufficient in traditional preparation techniques. In this study, by improving the slurry system, the effects of the solid content of the slurry, additives, and the pH of the slurry on the slurry system were investigated. ZTA powders with a uniform particle size distribution, high degree of sphericity and high flowability were prepared by spray granulation. The mechanical properties, microstructure and biocompatibility of the ZTA pressing were investigated after degreasing and sintering processes. The results showed that the hardness of the prepared ZTA ceramics was 1658.24 +/- 28.04 H V, the fracture toughness was 4.016 +/- 0.027 MPa m1/2, and the biaxial bending strength was 501.43 +/- 21.44 MPa, and the three-point bending strength reached 635 MPa. The ZTA ceramics also possessed good biocompatibility and a low haemolysis rate, which aligns with the requirements of clinical biomedical implant materials.
源语言英语
页(从-至)28641-28651
页数11
期刊Ceramics International
卷50
期16
早期在线日期6月 2024
DOI
出版状态已出版 - 15 8月 2024

基金资助

<b>Acknowledgements</b> This work was supported by the Gusangdong Basic and Applied Basic Research Foundation (No. 2021B1515120091) , National Key R &amp; D Program of China (No. 2023YFC2412300) , Technology Development Project of Shandong Weigao Orthopedic Materials Co., LTD. (No. 20221h0074) .

关键词

  • ZTA ceramic
  • Spray drying
  • Mechanical properties
  • Biocompatibility

收录

  • SCIE
  • Scopus

学术指纹

探究 'Preparation of high-performance zirconia toughened alumina doped with Cr2O3 and SrO for artificial joints by spray granulation' 的科研主题。它们共同构成独一无二的学术指纹。

引用此